How to Move a Washing Machine: Step-By-Step Washer Moving Guide

Transferring a washing machine on your own might end up being harder than you might imagine. There Are Numerous Big reasons why the washer going task before you could be a real challenge in case you choose not to employ professional movers:

• Washing machines are somewhat hefty . How much can one washer weigh? Typically, washing machines weigh somewhere between 150 lbs (68 kg) and 200 lbs (90 kg).
• Washing machines are large . Along with this monumental fat, washing machines are enormous also. Most washers are approximately the exact same size and form, which makes them simple to fit into a standard-size kitchen area. By way of instance, most front-loading washing machines have been approximately 33.46 inches (850 mm) tall and approximately 23.62 inches (600 mm) wide.
• Washers need extensive pre-move prep. Transferring a washing machine is never only about unplugging the appliance, loading it onto the moving dolly and transferring it out of the house. The prep phase includes searing the washer against the electricity source, turning off the water source, draining the water hoses, setting the transit bolts, and much more. Continue reading to learn more about ways to acquire a washing machine prepared to proceed.

As you can imagine, the very best method to maneuver a washing machine would be to employ experienced movers to finish that job for you — quicker and safer than you can ever do it on your own. But you might want to take action in your — typically in an effort to save cash.

And if this is true, then do yourself a favor and just adhere to this step-by-step guide to transferring a washing machine on your own.

Things to do before transferring a washing machine [5 measures ]

Here would be the very first Five steps you have to do if transferring a washing machine:

Measure 1. Safe helping hands

Transferring a washer completely in your own is too dangerous because of the huge burden and massive dimensions of their house appliance. In cases like this,”by yourself” does not follow that you’re expected to finish that tough task entirely in your own — it merely means that you will not be hiring professional movers to your occupation.

In the end, you are likely to require at least a few helpers to maneuver a washing machine out of house to house.

Measure 2. Rent or Buy an appliance dolly

Now that you know the average weight of a washing machine (150-200 lbs.) , you need to see that you can not lift and take the house appliance just with your bare hands. It is hopeless.

That is the reason why, you are likely to have to acquire a moving dolly to wheel the hefty thing from your present house, load it on the moving automobile, and then transport it into the new house or flat — safely and quickly.

Rent an appliance dolly out of a local moving company or even a nearby truck leasing service. As an alternative, you might opt to generate a fantastic investment and buy a moving dolly on your own — that way, you will have that super helpful bit of moving equipment each time you need to go out.

Measure 3. Collect packaging tools and other accessories

What exactly do you want to go into a washing machine?

At one stage during the washer going procedure, you are likely to get to pay for the appliance with heavy blankets for protection against unintentional strikes during the actual transfer.

Get 3-4 cushioned blankets prepared for later usage. Additionally, you’re likely to need moving rope or straps, in addition to packaging tape to safeguard your washing machine throughout transportation.

Besides the packaging materials, get a set of slip-joint pliers and a little bucket, or another similar container to assemble the water once the washer has been emptied.

Measure 4. Locate the washer transport bolts

Washer shipping bolts are metal rods which are put into the appliance so as to lock the drum and also maintain in trapped during transportation. Your washing machine can’t be transferred with no transit bolts installed since the vibrations onto the street can quickly harm the drum suspension system of this appliance.

Locate the delivery bolts of your own washer or get the very best home appliance shop in town for help if you don’t understand where these metallic sticks may be.

Measure 5. Locate the user manual of your washer

Though it’s possible to run your washing machine with no issues, its user guide will explain how you can set up the transit bolts and notify you of some other specific preparations and security measures when transferring the house appliance involving houses.

If you maintain the documentation, that is fantastic. Otherwise, Google it similar to that:

[brand of washer] + [version of washer] + user guide

10 things to do before going: The ultimate record

Preparation phase: The best way to prepare a washing machine for transferring [10 steps]

You likely know that if moving a refrigerator , you can not, or instead you should not move a fridge without defrosting it first. Transferring a washer to a new residence is a little more complex because washing machines need even more meticulous groundwork whether or not they’re front-load versions or top-load versions.

Here would be the groundwork steps when going a washing machine on your own:

Measure 1. Remove any clothing in the washer

Though this step is really obvious, you might still find the missing sock after a nearer review within the washer drum.

Measure 2. Clean the drum out

That closer look in the drum may disclose some residue in the detergent you have been using to clean your clothing. Run a brief wash cycle using water only or utilize the pre-set Clean Cycle to wash your washer drum from any detergent residue.

As a result, you will also wash out the drain lines of your own washing machine.

Measure 3. Dry the drum out

When there’s enough time before Moving day, then leave the doorway of your washer available for about 24 hours following the sterile Cycle so that the drum could dry out entirely.

If you are pressed for a while , then use a clean dry cloth to absorb some excess water left on the washing machine drum.

Measure 4. Disconnect the power source

To avoid any chance of electrical shock, you need to switch off the power before tackling your house appliance. Unplug the washer out of your wall socket to disengage it in the grid.

Measure 5. Shut off the water source

As soon as you’ve disconnected the washer against the electrical network, it is time to switch off the water source also. The way to disconnect your washer against the water source?

Locate the neighborhood water heater and turn it clockwise to close the water off. The typical place of the stop valve is supporting the appliance unit itself.

Exercise extra care to not disconnect some of those water drain lines when reaching to the water valve.

Measure 6. Drain the hoses which provide water

1 thing you can be certain of is that some water will still remain in the hoses.

The way to empty a washing machine? To manually drain a washing machine which is based on both cold and hot water supply to function, utilize the slip-joint pliers to disconnect the warm water supply hose out of the water valve, then drain the hose to the bucket or some similar container.

Do exactly the same with the chilly water supply hose — disconnect it from the valve, then drain it securely to a container of some type.

To drain a washer which heats the water within the device, you just have to drain the cold water hose hose. To prevent spills, empty just 1 hose at one time.

Measure 7. Remove and package the hoses which provide water

Now that you have eliminated any excess water out of the drain pads, it is time to eliminate those hoses entirely within the groundwork to move a washer on your own.

Use the pliers again and disconnect the water supply hoses in the washing machine. Pack them in a big plastic bag and set them in a cardboard box, and then tag that box WASHING MACHINE ACCESSORIES.

Measure 8. Empty the washer drain hose

Your washing machine ought to have a drain hose which will drain all of the dirty water to the wastewater discharge tube. Stick to that drain hose till its release stage, then disconnect it out there and then attach it securely to the rear of your house appliance.

The washer needs to have a particular bracket for holding this drain hose. Use additional tape to fasten it in order that no tripping injuries happen while transferring the washing machine using a dolly.

Measure 9. Install the transit bolts at the washer

Can you go a washing machine with no transit bolts? Yes, you can but you should not. As you already, sending bolts are going to continue to keep the washer drum locked in position so that it will not get ruined during the haul. With no locking metal sticks, the suspension system of your washing machine will probably get ruined and its fix may be more expensive than a brand-new washer.

Consult the washer user guide to understand how to fit the transit bolts. The precise installation procedure will change but generally speaking, there should be 2 openings at the back facet of the washing system, one per bolt. The concept is to fit the sticks attentively and then to turn them slightly so that they lock the drum set up.

Get in touch with the local home appliance shop to get help if you are uncertain how to set up the transit bolts of your washer.

Measure 10. Collect All of the manpower you have got

The last preparation step when moving a washer between houses is to ensure that your helpers are not there, prepared to provide you a helping hand. You should have at least another individual on your quest to transfer your washer, rather two.

The Very Best room-by-room packaging checklist for the move

Moving phase: The best way to move a washing machine on your own [5 measures ]

Because you can see for your self, obtaining a washing machine prepared for transferring is a 10-step procedure which may be equally time-consuming and hard — particularly the actions associated with disconnecting the water supply and draining the residual water out of the washer hoses.

Now includes the washing machine transfer phase, bringing some fantastic information (the procedure is pretty simple ) and some bad news too (the washer going component can be harmful ).

Follow the following steps to find out the proper way to proceed a washing machine:

Measure 1. Fasten the power cable

Secure the power cable into the rear of your appliance – utilize a little packing tape to be certain it remains in place. The very last thing you would need is to trip in your washer swinging cable through the moving process.

Measure 2. Pull the washer out thoroughly

You might have needed to pull on the appliance a little so as to accomplish the water valve supporting it or to disconnect and drain the water distribution hoses. Now, it is time to pull the appliance out completely out of its resting place.

Put a slider on every front leg or, if you do not have some furniture sliders at hand, then place a bit of soft fabric underneath those legs or borders to ease the slipping activity without causing any harm to the surface of the ground.

Measure 3. Pack the washing machine in blankets

This step is all about the physical security of your washing machine throughout the transfer. Now that you have the washer off from the wall or outside of its dedicated space in the cupboard, you need to make certain that it’s well-protected against unintentional strikes during transit.

Wrap the appliance with furniture blankets in this way as not to leave any unprotected locations. Regular home blankets may also do the job fine so long as they are soft enough (not coarse or rough ) to guard the washer surface, not scrape it.

When you pay the washer surface in its entirety, fasten the blankets with twine, rope or straps.

Measure 4. Load the washer on the appliance dolly

You are likely to want a toaster toaster (the two-wheel hand truck) to maneuver your washing machine outside of your house and load it to the anticipating moving automobile. This is undoubtedly the simplest way to move a washing machine. A furniture dolly (the four-wheel platform) may also work good but you will find it more challenging to move around corners and not possible to use upstairs or downstairs.

So, the way to go into a washing machine using a appliance dolly? Take both helpers tilt the washer backward so which you may slip the moving dolly beneath the appliance. Utilize the straps of this dolly to guarantee the unit as it is still on the floor, then tilt the transferring gear back before the washer becomes balanced onto the wheels. Do this carefully and slowly.

When the washer is filled on the machine toaster, tighten the rope or straps again to be certain that the washing machine is 100% secured and ready to be wheeled out.

Measure 5. Load the washer in the moving truck

As you are carrying your washing machine from the house, make an attempt to keep it in a vertical position. Transferring a washing machine on its side may be risky since the washer drum may get ruined — which is, to reduce its proper alignment.

Load the washer working with the ramp of the moving automobile. Once inside, fasten the house appliance to both sides of the van with specialized or rope ratchet straps. In any event, the washing machine shouldn’t proceed throughout the relocation visit to the new residence.

IMPORTANT: Once you have unloaded and put the washing machine at the new residence, do not forget to eliminate the shipping bolts prior to using it once more. Even better, you might require help to set this up correctly — particularly in regards to hooking up the water lines in and out of the washer.

Bear in mind that transferring a washing machine isn’t a joke, and so you ought to take that moving job seriously. If you do not, damage to the costly house appliance and private injuries are certainly not from the question.

Therefore, in the event you feel a little nervous about going a washer on your own, do the ideal thing and hire professional movers who’ll understand just what is necessary to go a washing machine out of house to house.