How to Move a Refrigerator by Yourself: Refrigerator Moving Guide

Transferring a fridge on your own will allow you to save money — the exact identical quantity of cash you’d provide specialist movers to do it for you.

However, is it a job for someone without considerable knowledge in transferring refrigerators between houses? Yes, it is a viable task so long as you stick to the perfect actions to transferring a fridge the ideal way.

Fridges aren’t just large, but they generally weigh a good deal. How thick is a fridge? Older Shops — generally roughly 15 years old or even more — may weigh up to 250 lbs., whereas newer fridges, produced of much lighter stuff, can weigh approximately 170-180 pounds.

Based upon your particular house moving scenario, it could be better to leave the harmful fridge transferring job to the experts just because the chance of property damage or personal injury is too high and can’t possibly be justified in the long run.

But if hiring movers to move your fridge isn’t a feasible alternative for you, then that toaster Moving Guide is just what you want. Keep reading to understand how to maneuver a fridge on your own.

Everything You Will Need to move a fridge on your own

Transferring a refrigerator by yourself is not a joke, so Here’s What you’ll Have to complete the job safely:

• Furniture sliders or plywood panels (see below for information )
• An appliance dolly with straps
• Furniture blankets
• Rope
• Packing tape
• Measuring tape
• Cozy shoes
• Function gloves for a better grip
• At least two trusted people to assist you outside

Don’t initiate the refrigerator moving job unless you’re prepared with the necessary gear and equipment, and you’re feeling confident you could handle it. It is a mistake to hurry the preparation point or worse – the true refrigerator relocation stage. Everything you will need to do is program every step carefully and patiently and remember that should things get rough, and they likely will at any stage, you could always get in contact with specialist fridge movers.

Packing supplies for transferring you could ’t perform without

The best way to prepare your refrigerator for transferring

Transferring a refrigerator properly contains quite a few preliminary tasks which can allow you to prepare your own kitchen appliance for transferring. Follow the following steps to ensure that your fridge is completely prepared to be wheeled out of your house and packed safely to the moving automobile.

Measure 1: Empty your refrigerator of its contents a few days before the day of your transfer.

Step 2: Select things to do including all the meals you simply removed from the unit — use this up, keep it into a cooler, give it away, or lose it. Your very best option is to plan beforehand and consume all or the majority of your perishables from the days and weeks leading up to Transferring day.

Measure 3: Switch away the refrigerator and detach it from the electrical network. If your fridge has a water dispenser or even a ice dispenser, then block the water source too.

Measure 4: Defrost the refrigerator by allowing it sit together with its own door open for many hours. The more extended time will be based on the space temperature and the quantity of ice in the freezer compartment. The way to defrost a fridge for moving in case you just happen to be in a rush? It is easy – use a hair dryer to melt the ice faster.

Step 5: Collect the water created by the defrosting process in appropriate containers. After that, pour that water from the sink and then wash up any residual moist stains within the kitchen device.

Measure 6: Clean all surfaces in the fridge utilizing a sponge sponge plus a cleaning mixture of water and baking soda. After that, use a soft cloth to wash up the interior of the appliance.

Measure 7: Have out all removable components of your refrigerator — shelves, drawers, lids, etc — and then wrap them up in packaging paper as well as bubble wrap should they appear brittle. Pack those refrigerator parts individually in a big cardboard box.

Measure 8: Leave the refrigerator door shut to keep the development of mold. If it is possible to get any disagreeable smells coming from the interior of your already empty and clean fridge, then depart within a container with lemon soda to hopefully neutralize the awful odor.

The aforementioned steps for preparing a new fridge to get a movement will get your big electric appliance prepared to be packed correctly — which is, secure on the exterior.

20 things to do before going: The Supreme Checklist

The best way to organize your fridge moving path

Now that your fridge is about to be transferred from the house, it’s time to organize its own move-out path in order to don’t get trapped in the center of the refrigerator shifting operation.

That’s correct: you are likely to require a great strategy and a very clear route.

Measure 1: Quantify up your refrigerator and jot down its measurements (width, height, and thickness ) onto a notepad.

Step 2: Measure the width and height of all of the doorways and halls across the road, beginning from the area where your refrigerator is positioned today (generally the kitchen) and finish with the front entrance of your residence or the front entry of your apartment construction.

Measure 3: Assess all dimensions to determine whether your refrigerator will pass smoothly through the doors and halls and its escape route. If so, then it’s possible to move on to the job of protecting the flooring. Otherwise, then visit Measure #4.

Step 4: Eliminate any debatable doors their hinges off to ensure a safe passing. You definitely do not need to get stuck into a door with the enormous and heavy refrigerator already loaded on the machine toaster.

Measure 5: Clear your leave paths by eliminating any barriers along the way like parts of furniture, empty or full packaging boxes, or whatever else which is standing on your way. To put it differently, the route between your refrigerator and also the moving truck ought to be totally clean and unobstructed.

Things to do if furniture will not fit through the doorway

The way to safeguard the ground when moving a fridge

Assessing the flooring is extremely important if hauling a fridge between two houses. As stated previously, fridges are super heavy (they hit around 250 lbs for older versions ), so it is relatively simple to damage your flooring if you are unable to give appropriate floor security.

You need to be certain that you’re using a great floor security technique so that you are able to move a fridge without scratching the ground – wood , vinyl, tiled or carpeting. The main reason is much more than apparent — any kind of harm on the flooring resulting from the moving blower will cost you cash for fix. And money is generally tight through a home move, so be on your shield.

The terrible thing is that flooring damage may be expensive. The great thing is the fact that it’s easily preventable using a few simple floor security procedures.

Listed below are the 3 important approaches to shield flooring when you are moving a refrigerator on your own — which is, without specialist aid.

Flooring protection strategy #1: Appliance dolly

The initial and most important way of shielding the flooring from damage would be to utilize an appliance dolly using rubber wheels to the actual transport of your refrigerator. Remember that this Fridge Transferring Guide clarifies ONLY the way to move a fridge using a dolly because this is actually the most effective way to transfer a refrigerator on your own.

That is the reason you have to contact a appliance dolly — it may be referred to as a refrigerator dolly in your individual case. It is possible to rent this incredibly handy piece of transferring equipment out of a local moving company, or even buy it in a house depot shop. The L-shaped lever on wheels can frequently prove to be a fantastic investment if you choose to have it.

Because of this, the wash rubber ducts of this appliance dolly will continue to keep your flooring perfectly secure when transferring a refrigerator all on your own.

Flooring protection strategy #2: Furniture sliders

So as to have the ability to receive the heavy kitchen appliance on the moving dolly, you are likely to get to transfer the refrigerator from its existing place, typically pressed closely against the walls and squeezed one of kitchen furniture pieces and other appliances.

So, the way to transfer a fridge from a tight area without damaging the flooring beneath it? Utilize furniture sliders — bits of durable vinyl and hard rubber that offer a low-friction kind of across-the-room slipping for thick products.

Measure 1: Take one of the helpers tilt softly the fridge to a side.

Step 2: Put a slider under every castor or foot of the refrigerator.

Measure 3: tug the blower that is bulky and it’ll begin to slide effortlessly towards you without causing some harm to the ground.

It’s possible to buy furniture sliders out of a neighborhood home depot store, purchase them on line or purchase them in a local transfer. Those sliders can do an excellent job if you would like to transfer a fridge to wash it.

Flooring protection strategy #3: Plywood panels

As time passes, refrigerators have a tendency to sink in the ground on account of their extreme weightreduction. That is the reason you’ll probably cause ground harm if you attempt to maneuver the heavy kitchen appliance without giving some kind of a floor shield first.

Besides sliders, then you may even decide to use a few quarter-inch plywood panels to ease the initial slipping.

Measure 1: Obtain one of the help to tilt softly the refrigerator to a single side.

Measure 2: Twist a plywood flooring panel beneath the front wheel or below the Whole side row of castors or foot of the machine.   Do exactly the same with another side of the refrigerator.

Step 3: Catch the front part of the refrigerator — do so as low as you can — and then pull on the heavyweight appliance on the plywood sheets.  View this YouTube movie to view just how to move a fridge without harm to your own kitchen flooring.

The best way to Safeguard floors when going

The best way to package a fridge for transferring

Fortunately, refrigerator packaging is really straightforward and the most important idea here would be to add extra protection to your big, heavy and costly appliance as you’re carrying it out of your house in the management of the moving van.

Listed below are the 3 basic Measures to packing a refrigerator for transferring:

Measure 1: Close to the refrigerator door, wrap the whole length of this appliance with furniture blankets, and then fasten the protective wrap using bits of tape. Regular household blankets may also do, but you will need to be certain that they’re soft – that’s not rough and abrasive. After all, you are attempting to guard the surface of the fridge, to not harm it.

Step 2: Twist up the electricity cable of this blower, fix it instead with zip ties or robust rubber bands. At length, tape it to the rear of the refrigerator so that you or some of your helpers will not accidentally trip to the cable throughout the refrigerator transport. Keep in Mind that SAFETY IS YOUR TOP PRIORITY if transferring a fridge to a different home.

Step 3: Secure the fridge door using a bit of rope or cable to be certain it will not open when you are transferring the bulky appliance from the house. Very similar to securing the power cable, this can be just another harm and harm prevention technique you need to use to remain on the secure side of stuff.

The best way to package your kitchen up to get a transfer

The best way to move a fridge using a dolly

Transferring a fridge using a dolly is the sole method to finish this possibly dangerous undertaking with decent outcomes. Professional movers that have several years of expertise will even use a toaster toaster for wheeling a refrigerator and load it to the moving truck.

Here are the measures that explain how to use a dolly to transfer your refrigerator quickly and securely:

Step 1: slip the fridge some space away from the wall by either using timber sliders or plywood planks (see previously ).

Step 2: Wrap the fridge in transferring blankets and fasten its own power cord as explained in detail above.

Measure 3: Get a helper suggestion the refrigerator slightly and then slip the appliance dolly underneath the enormous kitchen appliance.

Measure 4: Measure the dolly back before the fridge becomes nicely balanced about the wheels. Have someone to shove on the machine towards you since you are leaning back the U-Haul machine toaster.

Measure 5: Utilize the straps of this moving dolly to fasten the load on the two-wheeler. Look at using rope along with the straps for additional immobilization and enhanced security.

Measure 6: Can NOT lean the wealthy and manicured refrigerator with an angle more than 45 degrees or you will risk losing the ideal equilibrium.

Measure 7. Do NOT put the refrigerator on its negative because that actions will damage the machine. Keep reading for additional information relating to this security measure.

Measure 8: Start wheeling your refrigerator outside of your house. Try this very slowly and very carefully. Pull the wealthy moving dolly across the pre-determined depart pathway rather than pushing it. Pushing an appliance dolly generally means rougher and self indulgent maneuvering.

Measure 9: Be extra careful when moving through a door or over a very long narrow corridor using the fridge that is loaded. Move just 1 measure at a time, also possess both helpers maintaining the fridge balanced in any respect times. Look at eliminating temporary any doorway which proves to be only a little thinner for your own refrigerator to squeeze through it.

Measure 10: Take additional precaution in case you need to move the fridge downstairs. The way to transfer a fridge down stairs on your own? You should direct the refrigerator secured into the toaster while the other individual ought to be under the machine toaster, helping to move a single measure at one time. Ensure to pull on the moving dolly back toward you and resist the desire to shove it down the staircase. Maintain the refrigerator tilted in a 45-degree angle in any respect times to keep full charge of this circumstance.

Measure 11: Move to the leased vehicle and then start loading the fridge at the moving van employing the loading ramp. Gradually, pull on the kitchen appliance the ramp up while among your help pushes the load away from behind. Watch this YouTube movie to find the ideal method to load a fridge together a ramp and into a rental truck.

The best way to load a fridge at a pickup truck? Make sure that the pickup truck includes a loading ramp too and then you merely stick to exactly the exact same loading procedure as using a rental auto.

Measure 12: Safe the loaded refrigerator to both sides of this leasing truck utilizing ratchet straps or rope across the top and sides of this appliance. Transfer your fridge in a vertical posture, do NOT put the fridge on its side during transportation — keep reading to find out why. At the stage, it is much better to leave the refrigerator on the toaster during the true relocation rather than being required to fix it once more when you get to the new residence.  View this YouTube clip to understand how to procure a fridge onto a pickup truck.

Security Strategies for moving a fridge on your own

Lastly, let us take a look at a couple of super important security tips you need to follow when picking a fridge in your own — which is to say, without specialist aid.

Security suggestion #1: Would you put down a fridge when transferring it?

No, it is not okay to put down a refrigerator when hauling it since that may harm its heating system. Refrigerators may seem kind of indestructible, however in fact, those enormous kitchen appliances are somewhat sensitive and much brittle.

If a refrigerator is set on either side or tilted over a lot, the oil from the compressor unit will go in the heating lines, which alone may damage the heating system of your device.

Thus, do your very best to keep your fridge in a vertical position during the transfer.

Security suggestion #2: Just how long can you allow a fridge sit following moving?

When you place your refrigerator in the new house kitchen, you’ll have to wait three or more hours until you plug it in and turn it around.

You need to depart from your fridge refrigerated after moving since, when you put the kitchen appliance at its normal vertical position, the oil will begin producing its slow way ahead of the device mill.

Don’t plug in and turn in your refrigerator straight away because a number of this oil is going to have still stayed in the heating lines which may damage the machine.

WARNING: Transferring a fridge by yourself may be a risky undertaking: it might find your pricey kitchen appliance ruined or it might cause personal harm, or perhaps both. What is more, land damage isn’t from the question either.